P1

P2

P3

Folietastatur,  Membrane keyboard switch

Service ydelser:
  • Folietastatur
  • Membrane keyboard switch
  • Std. 12,16,20 Key. No tooling charge      
  • Mylar Dome og Metal Dome
  • Silicone Gummi Tastatur
  • Flex PCB
Kababilitet :
  • Operation Voltage 35VDC
  • Operation Current 100 ma
Min Ordre (MOQ):
Min: 500 USD, Min 50 Stk.

Firma profil:
  • 2000 ansatte
  • Fabiksareal 54000 m ²
  • Taipei 2 fabrikker
  • Shenzhen China 3 Fabrikker
Kvalitetsstandarder:
  • ISO 9001:2000
  • TS14969
  • ISO 14001
Prisniveau:
Under 30-40% af dansk pris.

P3

P4

P5

Referancer:  Motorola, Nokia, Honeywell, Segem, Sankyo, Nortel, Teac, Leica Siemens, Nissan

P6

P7
 

Was established in 1982 and now has over 1000 customers from all over the world for our membrane switches, flexible PCBs and touch panels and silicone rubber keypad. We employ more than 2000 workers in our seven factories, which are located in Taipei, Tu Chen (Taiwan) and Mainland China.
   We have diligent engineering teams who will use the latest R&D equipment to provide you with samples within one to two weeks, at very reasonable costs. All our factories maintain very flexible production lines, so however large or small your order, we can fulfil it, and you can rest assured that each of our factories are ISO 9001-2000 certified. In addition to this, some of our factories also have TS16949 and UL approved, we have powerful QC systems and accurate testing equipment for all our products.

  P8

P9
 

Produkter

         P10
Membrane Switch
P11 Standard 12 Keys,16Keys,20Keys 
P12 Mylar Dome And Metal Dome Both Are   Available
P13 Special Design For EMI, RFI. or ESD Shielding
P14 Raised Key With Mylar or Metal Tactile Effect
P15 S.M.D. Components on Mylar Circuit or Connector for Tail termination
  P16
Flexible PCB
P17 Flex-Rigid Board
P18 Multi-Layer Flex PCB
P19 Single-Side Flexible PCB
P20 Double-Side Flexible PCB
P21 S.M.D. Components on PCB
P22 UL E 156389 & E 200944
  P23
Touch Panel
P24 Analog  4 wire & 5 wire type
P25 Matrix type
  P26
Silicone Rubber Keypad
P27 Regular Keypad
P28 Multi-Color Keypad
P29 Complete Set - F.P.C. + LED +Keypad
P30 Complete Set - Mylar Circuit + LED + Keypad
P31 Complete Set - P.C.B. + Keypad + Components
   
  STANDARD PRODUCTS
  P32

Standard 12 Keys, 16Keys, 20Keys Are No Tooling Charge Necessary

  P33

Mylar Dome And Metal Dome Both Are Available

  P34

Special Design For EMI, RFI or ESD Shielding

  P35

Raised Key With Mylar or Metal Tactile Effect

  P36

S.M.D. Components on Mylar Circuit or Connector for Tail Termination

    SPECIFICATIONS
  P37

Operation Voltage ..............................................................< 35 vdc

  P38

Operation Current  .............................................................< 100 ma

  P39

Contact Resistance..................... ......................................< 100 ohms

  P40

Open Circuit Resistance ...................................................< 10 meg ohms

  P41

Operation Force...................................................................< 30g to 500g

  P42

Operation Temperature.......................................................< -35C to +70C

  P43

Storage Temperature...........................................................< -45C to +90C

  P44

Life Expectancy......................................................................< 5x105 to 3x107 cycles

  P45

Switch Stroke.........................................................................< 0.1 -0.6 mm

  P46

Contact bounce.....................................................................< 5 -30 msec

          R & D

GENERAL STATEMENT

We set up the Engineering Department as one of the most essential programs
before mass production , which determines throughout all manufacturing
techniques in processes of the production, and it's important as a known motto
"QUALITY is procured by good Design & Manufacture, rather than by
Inspection"

ORGANIZATION


1. Samples Making Section.
2. Production Engineering Section.
3. Research & Development Section


TASK

1 Samples Making Section.

1.1 Engineering analysis
Experienced and skillful technicians will analyze materials, drawings,
Specs., constructure... etc. information from Sales Dept., to design the
proper tools and fixture for product requirements.
Make revised suggestions to customer when there are potential
quality problems in original drawings or Specs. that may occur in mass
production.
1.2 Samples making & Reliability test
Provide fastest sample production and follow up Physical, Environmental
, Life... (optional) tests to make sure the products are safe and reliable in
properties.
1.3 Establish STANDARD OPERATING PROCEDURE for Manu. Dept.

1.4 Specify INSPECTION STANDARD that customer demands for Q.A.

2 Production Engineering Section

2.1 Usually station in Manu. Dept. to instruct professional skill for operators
to avoid mistakes, or to solve quality problem during mass production.
2.2 Improve operation process to be more efficient, and feedback practical
situations for Samples Making Sec. or R&D Sec.

3 Research & Development Section

3.1 Research new materials or new manufacturing methods for existent
products.
3.2 Research new technology & develop new product, and trial run its
manufacturing process.
P47

P48

P49

P50
  QUALITY POLICY
         
We satisfy customers' requirement wit best quality and service !


QUALITY COMING FROM WELL DESIGN

For the Hardware Software, Mechanism, Tooling ,Pressing and Electronic manufacturing personnel in R&D department, MKS have well experience about those.
All manufacturers of Assembly in Taiwan now are are still staying on the understanding that quality is coming from Inspection in process ,MKS has already entered into the stage that the quality comes from the well design through the selection of supplier, certification of material, well planning of process design and quality control,....etc. We are continuously improving and refining our practices to construct a better product. We maintain a comprehensive defect data system for all production areas. This allows us to avoid mistakes and to account for new problems that arise. &#12288;

PRODUCT QUALITY AND TRACEABILITY

1. Manufacturing processes are documented and controlled through
manufacturing assembly procedures
2. Quality records for electrical test and final assembly test are identified to part
number and lot
3. Product labeling typically includes part number, revision, date code and
regulatory information.
4. Quantifiable color matching and color controls via spectrophotometer.



QUALIFICATION

1. ISO 9000
2. QS9000
3. UL

  P51
B1B2B3B4B6
B7 B8 B9 B10 B11 B12
F10 F11 F12
Facebook Facebook Facebook Facebook Facebook Facebook HOME BACK
Oversaet
APC, Elektronikmontage, Elektronik montage,
Elektronikproduktion, ICT Incircuit Test, FT Funktionstest, Box Build, Printkortmontage, PCBA, Printkort, PCB,
Folietastatur, Optoelektronik, LCD, LCM, LED, TFT, Transformatorer,
Spoler, PowerSupply, Adaptere, Kabelkonfektion, Produktudvikling, Elektronikudvikling